♥♥♥
Please click on TAG to see in full size.
•••  Supplies needed to complete this tutorial. •••
________________________________________________________________________
Programs: Paint Shop Pro, I'm using version 10. Animation Shop 3.
Plugin : none
Font used: LD Edward
Tube of choice: I'm using "Amber" by Zlata from SATC.
Scrap Kit : I'm using "Purple Dreams" by Amy Marie Kits from SATC
Mask: SophisticatSimone-Mask61
Animation: SimoneAni-DreamNightGlitter
________________________________________________________________________
♥♥♥
Save your tag often. Nothing like working long and hard on a tag and PSP crashes.
♥♥♥

Open Mask61 in PSP and minimize.
Open a new image 700 x 650. Copy and paste paper 12 as a new layer on your canvas.
Close original.
Click on Raster 1. Go to Selections, select all.
Click on Raster 2. Go to Image, crop to Selection.

Copy and paste your tube as a new layer.
Copy and paste close up of tube as a new layer.
Move down to your paper and change Blend Mode to Luminance (L) and Opacity to 42.
Click on Raster 1. Go to Selections, select all.
Click on Raster 2. Go to Image, crop to Selection.
X-out your tube and Raster 1.
Click on Raster 2 and merge visible.
UN-hide your tube and Raster 1.

Copy and paste element 99 as a new layer and re-size by 65%. Position behind your tube low on your canvas. Leave in center of tag.

Copy and paste element 98 as a new layer. Position to the left on your canvas.

Copy and paste element 85 as a new layer and position in front of Eiffel Tower at bottom of tag.

Copy and paste element  1 as a new layer and position behind the Eiffel Tower on the left side of tag. Duplicate leaves, free rotate by 90 degrees and flip. Move the leaves to the right side of tag behind your tube. Using your lasso tool, remove the branch portion of this element.

Copy and paste element 56 as a new layer. Position behind your tube low on your canvas and in front of flower.
Copy and paste element 10 as a new layer. Position behind your tube high on canvas at top and at center.
Copy and paste element 2 as a new layer, free rotate right by 90 degrees and position to the left side of tag, behind Tower.

Copy and paste element 40 as a new layer and re-size by 50%. Position in front of your tube on the lower right hand side of tag.
Copy and paste element 43 as a new layer and re-size by 50%. Position in front of your tube on the lower right hand side of tag.
Copy and paste element 104 as a new layer and re-size by 50%. Position in front of Eiffel Tower lower left hand side of tag.
Copy and paste element 61 as a new layer. Position in background, near your tube.
Keep adding elements. Flowers, telephone, mask, ribbons and vase.

Add the glitter swirl, element 90 and 89 as new layer.

Add copyright and scrap kit maker credit.
Add your name and save.

Now to animate.

Go to Selections, select all.
Go to Edit and copy merged. Paste as a new animation in Animation Shop.
Hold your Ctrl key down and repeatedly hit letter L on your keyboard for a total of 18 frames.
You can watch the count on the lower right hand side of your screen in AS.
Open SimoneAni-DreamNightGlitter-MNG
Go to Edit, select all.
Go to Edit, copy.

Activate your tag.
Go to Edit, select all.
Go to Edit, make sure Propagate Paste is selected.
Go to Edit, Paste, paste into selected frames.

Position on your tag and click into place.

Play and save.
Don't forget to add your name.
You can see my name tutorial HERE.

To save:
Go to File, Save as, enter the name of your file and select the folder to save to.
Now click on Customize:
Under COLORS TAB:
Number of colors: 255 Colors
Create palette by: OPTIMIZED OCTREE
Reduce colors by: Error Diffusion
Under OPTIMIZATIONS TAB:
set a check mark beside the second, third and forth choices. UN-check the 1st and last.
Under PARTIAL TRANSPARENCY:
check Convert pixels less than 92
Yes, blend with this color: change to white #FFFFFF
Click OK. Click Next, next, next, next.
Play your animation.
At times your animation may or will come out terrible. Optimization in Animation Shop is not the greatest.
You can play around will your settings, especially under the Tab: Optimization. I change this setting at times from anywhere between 70 and 100.
Some people add a white background.  To add background, go to Animation: Animation Properties, select Opaque and change color to white.

Hope you enjoyed this tutorial,
Hugs Simone
Please, always direct people to my blog to download my animations.
Do not load to any other download site and don't claim as your own.
Tutorial written by SophisticatSimone aka Lorraine Halle on Sunday, May 12,  2013.

♥♥♥
Please click on TAG to see in full size.
•••  Supplies needed to complete this tutorial. •••
________________________________________________________________________
Programs: Paint Shop Pro, I'm using version 10. Animation Shop 3.
Plugin : NONE
Font used: Bangle
Tube of choice: I'm using "Spring" by Alex Prihodko from Pics For Design
Scrap Kit : I'm using "Katy Love" by Bibi's Collection from SATC
Animations : Made by me, Mask0112, HERE.  
Mask: Made by me, HERE.
________________________________________________________________________
♥♥♥
 Save your tag often. Nothing like working long and hard on a tag and PSP crashes.
♥♥♥

Open Paper 9 from kit "Bibi Katy Love". Duplicate and close original. Re-size by 60% at 72 dpi and check Smart Size.
Right click in layers palette and promote background to layer.
Open your mask of choice in PSP. I'm using Mask0112-SophisticatSimone.
Activate your paper. Go to Layers, New Mask Layer, From Image.
In drop down list find your mask and select.
Check : Source luminance
and make sure Invert mask data is UN-checked.
Click OK.

Copy and paste element 83 as a new layer and re-size by 75%.
Move a little to the left and add drop shadow.

Copy and paste element 28 as a new layer and re-size by 45%.
Move to the left in front of tree and add drop shadow.

Copy and paste element 60 as a new layer and re-size by 25%.
Place anywhere on your tree and add drop shadow.

Copy and paste element 9 as a new layer and re-size by 30%.
Mirror image and place anywhere on your tree and add drop shadow.

Copy and paste element 61 as a new layer and re-size by 94%.
Move to the bottom of tag in front of tree layer.

Copy and paste your tube as a new layer. Place her/him on top of grass layer.
Add drop shadow.

Copy and paste element 26 as a new layer and re-size by 90%.
This layer should be between your mask layer and your tree layer.
You will notice a hard edge on the right hand side. Using your selection tool set to 20 feather, just select a small portion of that edge and delete. It should soften it up.

Copy and paste element 41 as a new layer and re-size by 45%.
Move this bird above your tube layer and place it on her knee and add drop shadow.

Copy and paste element 30 as a new layer and re-size by 45%.
Move the chest by the cat and add drop shadow.

Copy and paste element 46 as a new layer and re-size by 22%.
Move in front of tube at bottom of tag and add drop shadow.

Copy and paste element 68 as a new layer and re-size by 40%.
Move so the grass appears behind the tube and add drop shadow.
Do the same for element 51.

Add the sun, element 50 and re-size by 40. Move to the upper right hand side of tag.

Copy and paste element 45 and re-size by 35%. Place at the bottom of tag in front of tube.
Copy and paste element 82 and re-size by 35%. Place behind your cat element and in front of tree. Add drop shadow.
Copy and paste element 66 and re-size by 50%. Place at your tubes knees and behind your tube. Add drop shadow.
Copy and paste element 49 and re-size by 20%. Place at your tubes feet in front of tube and add drop shadow.Duplicate and move to the left side in front of chest.
Paste again as a new layer and re-size by 25%. Mirror and add drop shadow. Place in front of chest as well, but behind the 1st flower.

Add any other element that you think would fill any blank spots and add to the overall look of your tag.

Add artist copyright and scrap kit maker credit.
Save your tag in layers.
Make sure you've added drop shadows to all your layers.
Grab your crop tool and on tool bar where it says Snap crop rectangle to: choose "merged opaque".
Either click Apply or double click your tag.

Add your name, merge all visible and save as a PNG.

♥♥♥

If you choose to animate, don't add your name yet.
Go to Selections, select all.
Go to Edit and copy merged. Paste as a new animation in Animation Shop.
Hold your Ctrl key down and repeatedly hit letter L on your keyboard for a total of 20 frames.
You can watch the count on the lower right hand side of your screen in AS.
Open SimoneAni-LazyDays-Tutorial
Go to Edit, select all.
Go to Edit, copy.

Activate your tag.
Go to Edit, select all.
Go to Edit, make sure Propagate Paste is selected.
Go to Edit, Paste, paste into selected frames.

Position on your tag and click into place.

Play and save.
Don't forget to add your name.
You can see my name tutorial HERE.

To save:
Go to File, Save as, enter the name of your file and select the folder to save to.
Now click on Customize:
Under COLORS TAB:
Number of colors: 255 Colors
Create palette by: OPTIMIZED OCTREE
Reduce colors by: Error Diffusion
Under OPTIMIZATIONS TAB:
set a check mark beside the second, third and forth choices. UN-check the 1st and last.
Under PARTIAL TRANSPARENCY:
check Convert pixels less than 92
Yes, blend with this color: change to white #FFFFFF
Click OK. Click Next, next, next, next.
Play your animation.
At times your animation may or will come out terrible. Optimization in Animation Shop is not the greatest.
You can play around will your settings, especially under the Tab: Optimization. I change this setting at times from anywhere between 70 and 100.
Some people add a white background.  To add background, go to Animation: Animation Properties, select Opaque and change color to white.

Hope you enjoyed this tutorial,
Hugs Simone
Please, always direct people to my blog to download my animations.
Do not load to any other download site and don't claim as your own.

Tutorial written by SophisticatSimone aka Lorraine Halle on Sunday, April 28, 2013.

  ♥♥♥
Please click on TAG to see in full size.
•••  Supplies needed to complete this tutorial. •••
__________________________________________________________________

Programs: Paint Shop Pro, I'm using version 10. Animation Shop 3.
Plugin :Eye Candy 4000(gradient glow).
Font used: Will & Grace
Tube of choice: I'm using the Blanche by SkyScraps from SATC.
Scrap Kit : Dark Riding Hood by Bibi's Collection found HERE
Mask: by me, mask 101 HERE
Animations: by me, Pixie Dust download HERE I used SimoneAni398
__________________________________________________________________

♥♥♥
 Save your tag often. Nothing like working long and hard on a tag and PSP crashes.
♥♥♥
Open element 94. Copy and paste as a new layer and re-sizy by 50%.
Free rotate 90 degrees to the right.
Re-size canvas to 700 x 700. Move the frame to the right side of tag.

Using your magic wand, feather 0, click inside the frame.
Go to selections, modify, expand by 10.

Open paper of choice, I'm using paper 1.
Copy and paste as a new layer and position area of choice within the frame.
Go to selections, invert and delete.
Move your paper below your frame.

Keep selection.
Copy and paste your tube close up as a new layer.
Delete extra.
De-select.
Duplicate the close up layer.
Both layers should have blend mode set to Overlay.
On the bottom close up layer blur the image by 3.

On the paper layer below the frame and closeups, let's select it and Colorize.
Colorize paper, Go to Adjust, Hue and Saturation, Colorize:
 Hue: 146, Saturation: 147.

Merge visible.

Copy and paste element 27 as a new layer. Re-size by 50%.
Move this element on the left side of the frame and add drop shadow.

Copy and paste your tube as a new layer. Re-size if you need to. I re-sized mine by

50%. Mirror and add drop shadow.

Copy and paste element 45 as a new layer and re-size by 50%. Place on right side of

frame and add drop shadow.

Copy and paste element 90 as a new layer and re-size by 50%. Place on left side of

frame, behind the castle and add drop shadow.

Copy and paste element 82 as a new layer and re-size by 50%. Place on left side of

frame, behind the castle, in front of mushrooms and add drop shadow.

Copy and paste element 96 as a new layer and re-size by 50%. Place on the upper

right side of frame/tag, duplicate and merge down.
Duplicate and go to Image, Rotate, free rotate to the right by 90 degrees.
Move this to the bottom of the frame and in the layers palette drag it down to just

above the frame layer. Add drop shadow to both.

Copy and paste element 48 as a new layer and duplicate, merge down.
Position as your top layer and in front of your tube and the bottom of tag.

Copy and paste element 47 as a new layer and tuck it behind your tube layer and the

castle layer, but leave it on the left hand side of the tag. Duplicate and mirror.
This log should be dragged down to the very bottom in the layers palette, so behind

your frame layer. Add drop shadow to both logs.

Copy and paste paper of choice as a new layer. I used the same paper (1).
Move this paper to the very bottom.
Select your crop tool, where it says "snap crop rectangle to:" select Merged Opaque.
Double click on your tag.

Let's add our mask to this layer.
Open Mask0101SophisticatSimone.
Make sure your tag is active and go to Layers, New Mask Layer, From Image.
Find mask in drop down list and apply.
Merge group. Only the mask layers group.

Copy and paste element 26 as a new layer and move behind your tube layer and the

log layer. Add Drop shadow.

Copy and paste element 24 as a new layer, and re-size by 37% and move to the front

of frame to the left. See my tag for reference.

Copy and paste element 18 as a new layer, and move behind castle layer and behind

your tube. To the left of the frame. See my tag for reference. Add drop shadow.

Add any other elements to make it your own. I added more mushrooms, the rabbit,

the second log, feathers, butterflies and rock. Those are all in the kit.

Add artist copyright and scrap kit maker credit.

Save as PNG if you are NOT animating.
_____________________________________________________

Now to animate.

Go to Selections, select all.
Go to Edit and copy merged. Paste as a new animation in Animation Shop.
Hold your Ctrl key down and repeatedly hit letter L on your keyboard for a total of 16 frames.
You can watch the count on the lower right hand side of your screen in AS.

Open SimoneAni398
Go to Edit, select all.
Go to Edit, copy.

Activate your tag.
Go to Edit, select all.
Go to Edit, make sure Propagate Paste is selected.
Go to Edit, Paste, paste into selected frames.

Position on your tag and click into place.

Play and save.
Don't forget to add your name.
You can see my name tutorial HERE.
You can either do it animated like in the tutorial or still.

To save:
Go to File, Save as, enter the name of your file and select the folder to save to.
Now click on Customize:
Under COLORS TAB:
Number of colors: 255 Colors
Create palette by: OPTIMIZED OCTREE
Reduce colors by: Error Diffusion
Under OPTIMIZATIONS TAB:
set a check mark beside the second, third and forth choices. UN-check the 1st and

last.
Under PARTIAL TRANSPARENCY:
check Convert pixels less than 92
Yes, blend with this color: change to white #FFFFFF
Click OK. Click Next, next, next, next.
Play your animation.
At times your animation may or will come out terrible.
Optimization in Animation Shop is not the greatest.
You can play around will your settings, especially under the Tab: Optimization.
I change this setting at times from anywhere between 70 and 100.
Some people add a white background.  To add background, go to Animation:

Animation Properties, select Opaque and change color to white.

Hope you enjoyed this tutorial,
Hugs Simone
Please, always direct people to my blog to download my animations.
Do not load to any other download site and don't claim as your own.

Tutorial written by SophisticatSimone aka Lorraine Halle on Saturday, April 20, 2013.