My Blinkie
Showing posts with label LizquisScraps. Show all posts
Showing posts with label LizquisScraps. Show all posts
Sunday, October 27, 2013
♥♥♥
Please click on TAG to see in full size.
••• Supplies needed to complete this tutorial. •••
________________________________________________________________________
Programs: Paint Shop Pro, I'm using version 10. Animation Shop 3.
Plugin : Eye Candy: Gradient Glow for name.
Font used: Computerfont
Tube of choice: I'm using "Space Girl" by José Cano
Please click on TAG to see in full size.
••• Supplies needed to complete this tutorial. •••
________________________________________________________________________
Programs: Paint Shop Pro, I'm using version 10. Animation Shop 3.
Plugin : Eye Candy: Gradient Glow for name.
Font used: Computerfont
Tube of choice: I'm using "Space Girl" by José Cano
Scrap Kit : I'm using "Space Girl" by LizquisScraps(no longer available) alternative by Monti found at CDO HERE
Animation: SimoneAni-Rocket
Mask: SSMask0180
________________________________________________________________________
♥♥♥
Save your tag often. Nothing like working long and hard on a tag and PSP crashes.
♥♥♥
Open a new image 650 x 650. Select all. Copy and paste paper 6 into the selection.
De-select. Duplicate layer and change blend mode to multiply. Merge down.
Apply Mask 180 to layer and merge group.
C/P planet 2 as a new layer and re-size by 52%. Position in upper right hand side.
Add drop shadow.
C/P monster 3 as a new layer and re-size by 76%. Position in lower right hand side of tag.
Add drop shadow.
C/P tube, re-size by 76%. Center in tag and add drop shadow.
C/P monster 1 as a new layer and re-size by 70%. Position in lower left hand side of tag.
Add drop shadow.
C/P planet 1 and re-size by 30%. Place in upper left hand side of tag. Add drop shadow.
C/P decor and position behind space girl tube and duplicate, mirror. Add drop shadow.
Move one to the left side and one to the right side.
C/P costume and re-size by 38%. Free rotate to the right by 35 degrees. Position on the left side below earth planet.
Add drop shadow.
C/P Venus flower and re-size by 64%. Position bottom right side, near your tube. Add drop shadow.
C/P sparkles2 over your tube layer. Center.
C/P butterfly and re-size by 20% and place in upper left hand side of tag. Add drop shadow.
Add artist copyright. Merge visible.
Select all and copy. Paste in Animation Shop.
Hold your Ctrl key down and repeatedly hit letter L on your keyboard for a total of 16 frames.
You can watch the count on the lower right hand side of your screen in AS.
Open SimoneAni-Rocket
Go to Edit, select all.
Go to Edit, copy.
Activate your tag.
Go to Edit, select all.
Go to Edit, make sure Propagate Paste is selected.
Go to Edit, Paste, paste into selected frames.
Position on your tag and click into place. I placed mine in the lower left hand side of tag.
Play and save.
Don't forget to add your name.
To save:
Go to File, Save as, enter the name of your file and select the folder to save to.
Now click on Customize:
Under COLORS TAB:
Number of colors: 255 Colors
Create palette by: OPTIMIZED OCTREE
Reduce colors by: Error Diffusion
Under OPTIMIZATIONS TAB:
set a check mark beside the second, third and forth choices. UN-check the 1st and last.
Under PARTIAL TRANSPARENCY:
check Convert pixels less than 92
Yes, blend with this color: change to white #FFFFFF
Click OK. Click Next, next, next, next.
Play your animation.
At times your animation may or will come out terrible. Optimization in Animation Shop is not the greatest.
You can play around will your settings, especially under the Tab: Optimization. I change this setting at times from anywhere between 70 and 100.
Some people add a white background. To add background, go to Animation: Animation Properties, select Opaque and change color to white.
Hope you enjoyed this tutorial,
Hugs Simone
Please, always direct people to my blog to download my animations. Or SATC where I sell.
Do not load to any other download site and don't claim as your own.
Tutorial written by SophisticatSimone aka Lorraine Halle on Sunday October 27, 2013.
Animation: SimoneAni-Rocket
Mask: SSMask0180
________________________________________________________________________
♥♥♥
Save your tag often. Nothing like working long and hard on a tag and PSP crashes.
♥♥♥
Open a new image 650 x 650. Select all. Copy and paste paper 6 into the selection.
De-select. Duplicate layer and change blend mode to multiply. Merge down.
Apply Mask 180 to layer and merge group.
C/P planet 2 as a new layer and re-size by 52%. Position in upper right hand side.
Add drop shadow.
C/P monster 3 as a new layer and re-size by 76%. Position in lower right hand side of tag.
Add drop shadow.
C/P tube, re-size by 76%. Center in tag and add drop shadow.
C/P monster 1 as a new layer and re-size by 70%. Position in lower left hand side of tag.
Add drop shadow.
C/P planet 1 and re-size by 30%. Place in upper left hand side of tag. Add drop shadow.
C/P decor and position behind space girl tube and duplicate, mirror. Add drop shadow.
Move one to the left side and one to the right side.
C/P costume and re-size by 38%. Free rotate to the right by 35 degrees. Position on the left side below earth planet.
Add drop shadow.
C/P Venus flower and re-size by 64%. Position bottom right side, near your tube. Add drop shadow.
C/P sparkles2 over your tube layer. Center.
C/P butterfly and re-size by 20% and place in upper left hand side of tag. Add drop shadow.
Add artist copyright. Merge visible.
Select all and copy. Paste in Animation Shop.
Hold your Ctrl key down and repeatedly hit letter L on your keyboard for a total of 16 frames.
You can watch the count on the lower right hand side of your screen in AS.
Open SimoneAni-Rocket
Go to Edit, select all.
Go to Edit, copy.
Activate your tag.
Go to Edit, select all.
Go to Edit, make sure Propagate Paste is selected.
Go to Edit, Paste, paste into selected frames.
Position on your tag and click into place. I placed mine in the lower left hand side of tag.
Play and save.
Don't forget to add your name.
To save:
Go to File, Save as, enter the name of your file and select the folder to save to.
Now click on Customize:
Under COLORS TAB:
Number of colors: 255 Colors
Create palette by: OPTIMIZED OCTREE
Reduce colors by: Error Diffusion
Under OPTIMIZATIONS TAB:
set a check mark beside the second, third and forth choices. UN-check the 1st and last.
Under PARTIAL TRANSPARENCY:
check Convert pixels less than 92
Yes, blend with this color: change to white #FFFFFF
Click OK. Click Next, next, next, next.
Play your animation.
At times your animation may or will come out terrible. Optimization in Animation Shop is not the greatest.
You can play around will your settings, especially under the Tab: Optimization. I change this setting at times from anywhere between 70 and 100.
Some people add a white background. To add background, go to Animation: Animation Properties, select Opaque and change color to white.
Hope you enjoyed this tutorial,
Hugs Simone
Please, always direct people to my blog to download my animations. Or SATC where I sell.
Do not load to any other download site and don't claim as your own.
Tutorial written by SophisticatSimone aka Lorraine Halle on Sunday October 27, 2013.
Thursday, August 15, 2013
♥♥♥
Please click on TAG to see in full size.
••• Supplies needed to complete this tutorial. •••
________________________________________________________________________
Programs: Paint Shop Pro, I'm using version 10. Animation Shop 3.
Plugin : Eye Candy 4: Gradient Glow
Font used: CellosScript_PersonalUse
Tube of choice: I'm using "School Girl" by Jose Cano.
Scrap Kit : I'm using "School Girl" by Lizquis Scraps from S&Co
Animation: SimoneAni-551
Mask: 0114 HERE
________________________________________________________________________
♥♥♥
Save your tag often. Nothing like working long and hard on a tag and PSP crashes.
♥♥♥
Open a new image 700 x 700 transparent.
Copy and paste lockers on the left side of tag.
Copy and paste your tube as a new layer and re-size by 70%.
Position in center of tag.
Copy and paste desk1 as a new layer and re-size by 85%. Mirror and position mid tag on the right side.
Copy and paste books as a new layer and re-size by 40%. Position in front of lockers at the bottom of tag.
Copy and paste sneakers as a new layer and re-size by 40%. Position in lower left hand side of tag.
Copy and paste board as a new layer and position in the upper right hand side of tag.
Move this layer down to bottom.
Copy and paste world globe element as a new layer and re-size by 55%. Position on the desk.
Copy and paste bag element as a new layer and re-size by 55%. Position at bottom of tag on the right side.
Copy and paste paper 6 as a new layer and send to bottom.
On your blank Raster layer ( should be the very bottom layer) go to Selections, select all.
Go to Image, Crop to Selection.
Activate your paper layer again. Apply Mask 114. Go to Layers, New Mask Layer, from Image.
Merge mask group in the layers palette.
Activate your tube layer in the layers palette.
Copy and paste ribbon1 as a new layer and re-size by 55%. Move to lower right hand side of tag.
Copy and paste ribbon2 as a new layer and re-size by 60%. Move to lower left hand side of tag.
On the board element, using your Selection tool, set to rectangle and feather of zero, surround the white portion.
Copy and paste the tube close-up. Go to Selections, invert and delete.
Duplicate the close up.
On bottom layer add gaussian blur of 3 and change blend mode to Multiply.
On top layer change blend mode to either screen or soft light, whichever you like best.
Activate your top layer.
Copy and paste sparkles2 as a new layer and position on bottom half of tag.
Add any other elements you like.
Add drop shadow to all layers.
Re-size your canvas (all layers checked) by 85%.
Merge all top layers down up to and including your tube. So all the elements including the desk, books, globe, ribbons, etc.
That will be your top layer.
You bottom layer will be the mask, the lockers, the board and the close-up layers. So merge those together.
To animate:
Making sure your bottom merged layer is selected,
Go to Selections, select all.
Go to Edit and copy. Paste as a new animation in Animation Shop.
Hold your Ctrl key down and repeatedly hit letter L on your keyboard for a total of 21 frames.
You can watch the count on the lower right hand side of your screen in AS.
Open SimoneAni551
Go to Edit, select all.
Go to Edit, copy.
Activate your tag.
Go to Edit, select all.
Go to Edit, make sure Propagate Paste is selected.
Go to Edit, Paste, paste into selected frames.
Position on your tag and click into place. Place in center of tag.
Go back to PSP now and highlight (activate) your tube (top) layer and copy.
Paste as a NEW animation in AS.
Go to Edit, copy.
Activate your tag.
Go to Edit, Paste, paste into selected frames.
Play and save.
Don't forget to add your name.
To save:
Go to File, Save as, enter the name of your file and select the folder to save to.
Now click on Customize:
Under COLORS TAB:
Number of colors: 255 Colors
Create palette by: OPTIMIZED OCTREE
Reduce colors by: Error Diffusion
Under OPTIMIZATIONS TAB:
set a check mark beside the second, third and forth choices. UN-check the 1st and last.
Under PARTIAL TRANSPARENCY:
check Convert pixels less than 92
Yes, blend with this color: change to white #FFFFFF
Click OK. Click Next, next, next, next.
Play your animation.
At times your animation may or will come out terrible. Optimization in Animation Shop is not the greatest.
You can play around will your settings, especially under the Tab: Optimization. I change this setting at times from anywhere between 70 and 100.
Some people add a white background. To add background, go to Animation: Animation Properties, select Opaque and change color to white.
Hope you enjoyed this tutorial,
Hugs Simone
Please, always direct people to my blog to download my animations.
Do not load to any other download site and don't claim as your own.
Tutorial written by SophisticatSimone aka Lorraine Halle on Thursday August 15, 2013.
Please click on TAG to see in full size.
••• Supplies needed to complete this tutorial. •••
________________________________________________________________________
Programs: Paint Shop Pro, I'm using version 10. Animation Shop 3.
Plugin : Eye Candy 4: Gradient Glow
Font used: CellosScript_PersonalUse
Tube of choice: I'm using "School Girl" by Jose Cano.
Scrap Kit : I'm using "School Girl" by Lizquis Scraps from S&Co
Animation: SimoneAni-551
Mask: 0114 HERE
________________________________________________________________________
♥♥♥
Save your tag often. Nothing like working long and hard on a tag and PSP crashes.
♥♥♥
Open a new image 700 x 700 transparent.
Copy and paste lockers on the left side of tag.
Copy and paste your tube as a new layer and re-size by 70%.
Position in center of tag.
Copy and paste desk1 as a new layer and re-size by 85%. Mirror and position mid tag on the right side.
Copy and paste books as a new layer and re-size by 40%. Position in front of lockers at the bottom of tag.
Copy and paste sneakers as a new layer and re-size by 40%. Position in lower left hand side of tag.
Copy and paste board as a new layer and position in the upper right hand side of tag.
Move this layer down to bottom.
Copy and paste world globe element as a new layer and re-size by 55%. Position on the desk.
Copy and paste bag element as a new layer and re-size by 55%. Position at bottom of tag on the right side.
Copy and paste paper 6 as a new layer and send to bottom.
On your blank Raster layer ( should be the very bottom layer) go to Selections, select all.
Go to Image, Crop to Selection.
Activate your paper layer again. Apply Mask 114. Go to Layers, New Mask Layer, from Image.
Merge mask group in the layers palette.
Activate your tube layer in the layers palette.
Copy and paste ribbon1 as a new layer and re-size by 55%. Move to lower right hand side of tag.
Copy and paste ribbon2 as a new layer and re-size by 60%. Move to lower left hand side of tag.
On the board element, using your Selection tool, set to rectangle and feather of zero, surround the white portion.
Copy and paste the tube close-up. Go to Selections, invert and delete.
Duplicate the close up.
On bottom layer add gaussian blur of 3 and change blend mode to Multiply.
On top layer change blend mode to either screen or soft light, whichever you like best.
Activate your top layer.
Copy and paste sparkles2 as a new layer and position on bottom half of tag.
Add any other elements you like.
Add drop shadow to all layers.
Re-size your canvas (all layers checked) by 85%.
Merge all top layers down up to and including your tube. So all the elements including the desk, books, globe, ribbons, etc.
That will be your top layer.
You bottom layer will be the mask, the lockers, the board and the close-up layers. So merge those together.
To animate:
Making sure your bottom merged layer is selected,
Go to Selections, select all.
Go to Edit and copy. Paste as a new animation in Animation Shop.
Hold your Ctrl key down and repeatedly hit letter L on your keyboard for a total of 21 frames.
You can watch the count on the lower right hand side of your screen in AS.
Open SimoneAni551
Go to Edit, select all.
Go to Edit, copy.
Activate your tag.
Go to Edit, select all.
Go to Edit, make sure Propagate Paste is selected.
Go to Edit, Paste, paste into selected frames.
Position on your tag and click into place. Place in center of tag.
Go back to PSP now and highlight (activate) your tube (top) layer and copy.
Paste as a NEW animation in AS.
Go to Edit, copy.
Activate your tag.
Go to Edit, Paste, paste into selected frames.
Play and save.
Don't forget to add your name.
To save:
Go to File, Save as, enter the name of your file and select the folder to save to.
Now click on Customize:
Under COLORS TAB:
Number of colors: 255 Colors
Create palette by: OPTIMIZED OCTREE
Reduce colors by: Error Diffusion
Under OPTIMIZATIONS TAB:
set a check mark beside the second, third and forth choices. UN-check the 1st and last.
Under PARTIAL TRANSPARENCY:
check Convert pixels less than 92
Yes, blend with this color: change to white #FFFFFF
Click OK. Click Next, next, next, next.
Play your animation.
At times your animation may or will come out terrible. Optimization in Animation Shop is not the greatest.
You can play around will your settings, especially under the Tab: Optimization. I change this setting at times from anywhere between 70 and 100.
Some people add a white background. To add background, go to Animation: Animation Properties, select Opaque and change color to white.
Hope you enjoyed this tutorial,
Hugs Simone
Please, always direct people to my blog to download my animations.
Do not load to any other download site and don't claim as your own.
Tutorial written by SophisticatSimone aka Lorraine Halle on Thursday August 15, 2013.
Saturday, July 20, 2013
♥♥♥
Please click on TAG to see in full size.
••• Supplies needed to complete this tutorial. •••
________________________________________________________________________
Programs: Paint Shop Pro, I'm using version 10. Animation Shop 3.
Plugin : Eye Candy 4: Gradient Glow for the name. VM Extravaganza, AAA Frame
Font used: P22 OhLey
Tube of choice: I'm using "Anouk" by Jose Cano
Please click on TAG to see in full size.
••• Supplies needed to complete this tutorial. •••
________________________________________________________________________
Programs: Paint Shop Pro, I'm using version 10. Animation Shop 3.
Plugin : Eye Candy 4: Gradient Glow for the name. VM Extravaganza, AAA Frame
Font used: P22 OhLey
Tube of choice: I'm using "Anouk" by Jose Cano
Scrap Kit : I'm using "Anouk" by LizquisScraps from S&Co
Animation: none
Mask: none
________________________________________________________________________
♥♥♥
Save your tag often. Nothing like working long and hard on a tag and PSP crashes.
♥♥♥
Making timeline banner.
Open a new image 851 x 315, resolution: 72, raster background, transparent.
Open two papers of choice. I used paper 6 and paper 11.
Copy your 1st paper and paste as a new layer. Move to the right side of template.
Copy your 2nd paper and paste as a new layer. Move to the left. My top paper, the one that touches the left side, takes up the majority of my timeline banner. Play around and see what you like.
Copy and paste your tube as a new layer and drag her over the seem between the papers to hide it.
Copy and paste Anouk_label element as a new layer. Center and add drop shadow.
Copy and paste Anouk_speakers element as a new layer. Move to bottom and center. Add drop shadow.
Copy and paste Anouk_music lights element as a new layer. Should be your second layer from top, your tube being the first layer.
Position so it looks like it's coming out of the speakers.
Copy and paste Anouk_light3 element as a new layer and move behind your tube and cover some of the yellow paper on the right side.
Copy and paste Anouk_bombox element as a new layer and move low and to the left hand side of banner. Add drop shadow.
Copy and paste Anouk_bear element as a new layer, re-size by 55% and mirror. Position on the speaker. Add drop shadow.
Merge your two papers layers together.
Using your selection tool, set to rectangle, Mode set to Add, feather to 0. Select a portion behind your tube.
Promote your selection to layer.
Go to Effects>Plugins>VM Extravaganza>Transmission. Enter default settings.
Go to Selection>Select none. Now go to Image>Mirror>Image>Flip.
Back onto your paper layer. Using your selection tool again, select a small portion of the right side and the left side. Promote selection to layer.
Add noise. Got to Adjust>Add/Remove Noise>Add Noise>Check Gaussian, noise 83%, monochrome checked.
Merge those down to paper layer.
If you've put a drop shadow on all your elements and you are happy with your placement, save your tag as .pspimage.
Now duplicate and minimize original. I always save one tag in layers, just in case I want to add something or make changes.
Ok on duplicate tag(timeline), merge all visible.
Go to Effects>Plugins>AAA Frames>Foto Frame and enter the following:
In drop down box at bottom I selected: Black with Yellow Shadows and then I entered:
Width : 5
Brightness : -255
Stroke : 255
Matte : 5
Red : -160
Green : -180
Blue : -70
Opacity : 15
OK now for the avatar.
Open a new canvas 180 x 178, transparent.
Copy and paste your close up tube as a new layer.
Centre using your mover tool.
Merge all flatten. Repeat the border frame using AAA Frames.
For the copyright, you can't add the artist URL according to Facebook rules.
So just the add the copyright symbol © and artist name and your license number.
To get copyright symbol, hold down the Alt key on your keyboard and using your Numeric Keypad enter 0169.
Add your name using font of choice. I used P22 OhLey.
Hope you enjoyed this tutorial,
Hugs Simone
Please, always direct people to my blog to download my animations.
Do not load to any other download site and don't claim as your own.
Tutorial written by SophisticatSimone aka Lorraine Halle on Saturday July 20, 2013.
Animation: none
Mask: none
________________________________________________________________________
♥♥♥
Save your tag often. Nothing like working long and hard on a tag and PSP crashes.
♥♥♥
Making timeline banner.
Open a new image 851 x 315, resolution: 72, raster background, transparent.
Open two papers of choice. I used paper 6 and paper 11.
Copy your 1st paper and paste as a new layer. Move to the right side of template.
Copy your 2nd paper and paste as a new layer. Move to the left. My top paper, the one that touches the left side, takes up the majority of my timeline banner. Play around and see what you like.
Copy and paste your tube as a new layer and drag her over the seem between the papers to hide it.
Copy and paste Anouk_label element as a new layer. Center and add drop shadow.
Copy and paste Anouk_speakers element as a new layer. Move to bottom and center. Add drop shadow.
Copy and paste Anouk_music lights element as a new layer. Should be your second layer from top, your tube being the first layer.
Position so it looks like it's coming out of the speakers.
Copy and paste Anouk_light3 element as a new layer and move behind your tube and cover some of the yellow paper on the right side.
Copy and paste Anouk_bombox element as a new layer and move low and to the left hand side of banner. Add drop shadow.
Copy and paste Anouk_bear element as a new layer, re-size by 55% and mirror. Position on the speaker. Add drop shadow.
Merge your two papers layers together.
Using your selection tool, set to rectangle, Mode set to Add, feather to 0. Select a portion behind your tube.
Promote your selection to layer.
Go to Effects>Plugins>VM Extravaganza>Transmission. Enter default settings.
Go to Selection>Select none. Now go to Image>Mirror>Image>Flip.
Back onto your paper layer. Using your selection tool again, select a small portion of the right side and the left side. Promote selection to layer.
Add noise. Got to Adjust>Add/Remove Noise>Add Noise>Check Gaussian, noise 83%, monochrome checked.
Merge those down to paper layer.
If you've put a drop shadow on all your elements and you are happy with your placement, save your tag as .pspimage.
Now duplicate and minimize original. I always save one tag in layers, just in case I want to add something or make changes.
Ok on duplicate tag(timeline), merge all visible.
Go to Effects>Plugins>AAA Frames>Foto Frame and enter the following:
In drop down box at bottom I selected: Black with Yellow Shadows and then I entered:
Width : 5
Brightness : -255
Stroke : 255
Matte : 5
Red : -160
Green : -180
Blue : -70
Opacity : 15
OK now for the avatar.
Open a new canvas 180 x 178, transparent.
Copy and paste your close up tube as a new layer.
Centre using your mover tool.
Merge all flatten. Repeat the border frame using AAA Frames.
For the copyright, you can't add the artist URL according to Facebook rules.
So just the add the copyright symbol © and artist name and your license number.
To get copyright symbol, hold down the Alt key on your keyboard and using your Numeric Keypad enter 0169.
Add your name using font of choice. I used P22 OhLey.
Hope you enjoyed this tutorial,
Hugs Simone
Please, always direct people to my blog to download my animations.
Do not load to any other download site and don't claim as your own.
Tutorial written by SophisticatSimone aka Lorraine Halle on Saturday July 20, 2013.
Friday, July 12, 2013
♥♥♥
Please click on TAG to see in full size.
••• Supplies needed to complete this tutorial. •••
________________________________________________________________________
Programs: Paint Shop Pro, I'm using version 10. Animation Shop 3.
Plugin : Eye Candy 4: Gradient Glow
Font used: SplendidOrnamenty
Tube of choice: I'm using "Surfacing Mermaid" by Jay Trembly from SATC.
Scrap Kit : I'm using "Mermaid" by LizquisScraps from SATC
Animation: SimoneAni-Surfacing
Mask: 0143 HERE
________________________________________________________________________
♥♥♥
Save your tag often. Nothing like working long and hard on a tag and PSP crashes.
♥♥♥
Open a new canvas, 600 x 600, transparent background.
Copy and paste your tube as a new layer. Re-size by 70%, at 72 dpi and smart size checked.
Copy and paste dolphin as a new layer and move to the lower middle of tag.
Copy and paste wave1 as a new layer and move up and to the left. Up just enough to cover her nipples..
Duplicate and mirror. Move this layer a little lower and match the bottom of it with the bottom of dophin element.
Copy and paste water1 as a new layer. Move this layer below the dolphin layer in the layers palette. Center.
Copy and paste fish4 as a new layer and re-size by 80%. Position between bubble layer and the duplicate wave layer, on the right side of tag.
Add drop shadow.
Activate your top layer.
Copy and paste sparkles1 element as a new layer.
Activate your bottom layer. Should be a blank raster layer. If not, just add a new raster layer and send to bottom.
Go to Selections, select all.
Open paper 8 and copy. On your tag, go to edit, paste, paste into selection.
Open your mask (Masks0143). Apply mask to paper and merge group. Duplicate and change blend mode to difference. Merge down.
Add your artist copyright.
Merge all visible.
Now to animate.
Go to Selections, select all.
Go to Edit and copy merged. Paste as a new animation in Animation Shop.
Hold your Ctrl key down and repeatedly hit letter L on your keyboard for a total of 20 frames.
You can watch the count on the lower right hand side of your screen in AS.
Open SimoneAni-Surfasing-001 or one of the other ones if you'd like.
Go to Edit, select all.
Go to Edit, copy.
Activate your tag.
Go to Edit, select all.
Go to Edit, make sure Propagate Paste is selected.
Go to Edit, Paste, paste into selected frames.
Position on your tag and click into place. I placed mine upper left hand corner of tag.
Play and save.
Don't forget to add your name.
To save:
Go to File, Save as, enter the name of your file and select the folder to save to.
Now click on Customize:
Under COLORS TAB:
Number of colors: 255 Colors
Create palette by: OPTIMIZED OCTREE
Reduce colors by: Error Diffusion
Under OPTIMIZATIONS TAB:
set a check mark beside the second, third and forth choices. UN-check the 1st and last.
Under PARTIAL TRANSPARENCY:
check Convert pixels less than 92
Yes, blend with this color: change to white #FFFFFF
Click OK. Click Next, next, next, next.
Play your animation.
At times your animation may or will come out terrible. Optimization in Animation Shop is not the greatest.
You can play around will your settings, especially under the Tab: Optimization. I change this setting at times from anywhere between 70 and 100.
Some people add a white background. To add background, go to Animation: Animation Properties, select Opaque and change color to white.
Hope you enjoyed this tutorial,
Hugs Simone
Please, always direct people to my blog to download my animations.
Do not load to any other download site and don't claim as your own.
Tutorial written by SophisticatSimone aka Lorraine Halle on Friday July 12, 2013.
Please click on TAG to see in full size.
••• Supplies needed to complete this tutorial. •••
________________________________________________________________________
Programs: Paint Shop Pro, I'm using version 10. Animation Shop 3.
Plugin : Eye Candy 4: Gradient Glow
Font used: SplendidOrnamenty
Tube of choice: I'm using "Surfacing Mermaid" by Jay Trembly from SATC.
Scrap Kit : I'm using "Mermaid" by LizquisScraps from SATC
Animation: SimoneAni-Surfacing
Mask: 0143 HERE
________________________________________________________________________
♥♥♥
Save your tag often. Nothing like working long and hard on a tag and PSP crashes.
♥♥♥
Open a new canvas, 600 x 600, transparent background.
Copy and paste your tube as a new layer. Re-size by 70%, at 72 dpi and smart size checked.
Copy and paste dolphin as a new layer and move to the lower middle of tag.
Copy and paste wave1 as a new layer and move up and to the left. Up just enough to cover her nipples..
Duplicate and mirror. Move this layer a little lower and match the bottom of it with the bottom of dophin element.
Copy and paste water1 as a new layer. Move this layer below the dolphin layer in the layers palette. Center.
Copy and paste fish4 as a new layer and re-size by 80%. Position between bubble layer and the duplicate wave layer, on the right side of tag.
Add drop shadow.
Activate your top layer.
Copy and paste sparkles1 element as a new layer.
Activate your bottom layer. Should be a blank raster layer. If not, just add a new raster layer and send to bottom.
Go to Selections, select all.
Open paper 8 and copy. On your tag, go to edit, paste, paste into selection.
Open your mask (Masks0143). Apply mask to paper and merge group. Duplicate and change blend mode to difference. Merge down.
Add your artist copyright.
Merge all visible.
Now to animate.
Go to Selections, select all.
Go to Edit and copy merged. Paste as a new animation in Animation Shop.
Hold your Ctrl key down and repeatedly hit letter L on your keyboard for a total of 20 frames.
You can watch the count on the lower right hand side of your screen in AS.
Open SimoneAni-Surfasing-001 or one of the other ones if you'd like.
Go to Edit, select all.
Go to Edit, copy.
Activate your tag.
Go to Edit, select all.
Go to Edit, make sure Propagate Paste is selected.
Go to Edit, Paste, paste into selected frames.
Position on your tag and click into place. I placed mine upper left hand corner of tag.
Play and save.
Don't forget to add your name.
To save:
Go to File, Save as, enter the name of your file and select the folder to save to.
Now click on Customize:
Under COLORS TAB:
Number of colors: 255 Colors
Create palette by: OPTIMIZED OCTREE
Reduce colors by: Error Diffusion
Under OPTIMIZATIONS TAB:
set a check mark beside the second, third and forth choices. UN-check the 1st and last.
Under PARTIAL TRANSPARENCY:
check Convert pixels less than 92
Yes, blend with this color: change to white #FFFFFF
Click OK. Click Next, next, next, next.
Play your animation.
At times your animation may or will come out terrible. Optimization in Animation Shop is not the greatest.
You can play around will your settings, especially under the Tab: Optimization. I change this setting at times from anywhere between 70 and 100.
Some people add a white background. To add background, go to Animation: Animation Properties, select Opaque and change color to white.
Hope you enjoyed this tutorial,
Hugs Simone
Please, always direct people to my blog to download my animations.
Do not load to any other download site and don't claim as your own.
Tutorial written by SophisticatSimone aka Lorraine Halle on Friday July 12, 2013.
Tuesday, June 18, 2013
♥♥♥
Please click on TAG to see in full size.
••• Supplies needed to complete this tutorial. •••
________________________________________________________________________
Programs: Paint Shop Pro, I'm using version 10. Animation Shop 3.
Plugin : none
Font used: Carpenter
Tube of choice: I'm using "Courtney" by Jose A Cano.
Scrap Kit : I'm using "Courtney" by Lizquis Scraps.
Animation: SimoneAni469
Mask: 0139 HERE
________________________________________________________________________
♥♥♥
Save your tag often. Nothing like working long and hard on a tag and PSP crashes.
♥♥♥
Open Courtney_frame2. Duplicate and close original. Re-size by 80%, all layers UN-checked.
Now change your canvas size to 700 x 700.
Using your magic wand, feather set to 0, click inside your frame. Go to Selections, expand, by 10.
Copy and paste a close up of your tube as a new layer. Move down below the frame.
Go to Selections, Invert and hit delete on your keyboard.
If there's any space showing behind your close-up, copy and paste a paper, move it below your close-up and delete.
You can De-select.
Duplicate your close up. On the original close up layer, apply blur, Gaussian Blur of 3. On duplicate layer, change blend mode to soft light. Merge these two together. Now change blend mode to Multiply.
Duplicate your frame. Top frame layer, change blend mode to Multiply.
Add drop shadow to this frame:
V: 2
H: 5
Opacity: 64
Blur: 13
Color: black
Merge all visible.
Copy and paste Courtney_Grass as a new layer. Move to the left and bottom of frame layer.
Copy and paste Courtney_radio as a new layer. Re-size by 50% and move to the left side.
Copy and paste Courtney_Tree as a new layer. Place to the right of frame and behind the car.
C/P sparkles1 as a new layer. Place more to the left and over the frame.
C/P tube as a new layer. Mirror and re-size by 80%. Delete extra at the bottom of tube using your selection tool set to rectangle and feather set to 25. Select area from crotch to below. Delete.
Copy and paste Courtney_dog as a new layer. Re-size by 50% and move to the right side.
Copy and paste Courtney_bag as a new layer. Re-size by 50% and move to the right side beside dog.
Add drop shadow to every layer.
C/P Paper 1 as a new layer. Send to bottom.
Click on any other element to activate that layer. Go to Selections, select all. Activate your paper layer again.
Go to Image, crop to selection. Apply Mask 0139, merge group. Duplicate layer. Add drop shadow.
Merge all visible.
Add artist copyright.
Save as PNG.
To animate:
Go to Selections, select all.
Go to Edit and copy merged. Paste as a new animation in Animation Shop.
Hold your Ctrl key down and repeatedly hit letter L on your keyboard for a total of 21 frames.
You can watch the count on the lower right hand side of your screen in AS.
Open SimoneAni469
Go to Edit, select all.
Go to Edit, copy.
Activate your tag.
Go to Edit, select all.
Go to Edit, make sure Propagate Paste is selected.
Go to Edit, Paste, paste into selected frames.
Position on your tag and click into place.
Play and save.
Don't forget to add your name.
To save:
Go to File, Save as, enter the name of your file and select the folder to save to.
Now click on Customize:
Under COLORS TAB:
Number of colors: 255 Colors
Create palette by: OPTIMIZED OCTREE
Reduce colors by: Error Diffusion
Under OPTIMIZATIONS TAB:
set a check mark beside the second, third and forth choices. UN-check the 1st and last.
Under PARTIAL TRANSPARENCY:
check Convert pixels less than 92
Yes, blend with this color: change to white #FFFFFF
Click OK. Click Next, next, next, next.
Play your animation.
At times your animation may or will come out terrible. Optimization in Animation Shop is not the greatest.
You can play around will your settings, especially under the Tab: Optimization. I change this setting at times from anywhere
between 80 and 100.
Some people add a white background. To add background, go to Animation: Animation Properties, select Opaque and change color to white.
Hope you enjoyed this tutorial,
Hugs Simone
Please, always direct people to my blog to download my animations.
Do not load to any other download site and don't claim as your own.
Tutorial written by SophisticatSimone aka Lorraine Halle on Wednesday, June 18 2013.
Monday, May 20, 2013
♥♥♥
Please click on TAG to see in full size.
••• Supplies needed to complete this tutorial. •••
________________________________________________________________________
Programs: Paint Shop Pro, I'm using version 10. Animation Shop 3.
Plugin : Eye Candy: Gradient Glow for name
Font used: Carpenter
Tube of choice: I'm using "Punk Mermaid" by Jay Trembly from SATC.
Scrap Kit : I'm using "Mermaid" by Lizquis Scraps from SATC
Animation: I'm using my own, SimoneAni-OceanApartTutorial
________________________________________________________________________
♥♥♥
Save your tag often. Nothing like working long and hard on a tag and PSP crashes.
♥♥♥
Open a new image 725x 796. You can re-size at the end. C/P your tube as a new layer.
C/P decor3 (tire) as a new layer and mirror. Position your mermaid on the tire.
C/P sand1 as a new layer and move done below the tire.
C/P sand2 as a new layer and move behind the tire.
C/P moss2 as a new layer and move in front of the tire to the right.
C/P deco4 as a new layer and move to the left side of tag. Re-size by 48%.
Do the same for deco2 and deco3. Deco3 I mirrored and placed to the left. I placed deco2 to the right.
C/P moss1 as a new layer and move behind all layers and in upper left hand area of tag.
Repeat for deco5. Re-size by 38%. I placed in center of tire.
Repeat for deco6. Re-size by 60%. Mirror and move to the upper right side of tire.
C/P bubbles1 and paste as your top layer. Duplicate and merge. Position anywhere on your tag.
C/P dolphins and mirror.
C/P fish6 and fish2. Re-size and position where you'd like.
Add any other element you like. I added the anchor, the net and the rudder.
Add drop shadow to all layers.
C/P paper and move to bottom. Click on one of the small elements.
Go to Selections, select ALL.
Go to Edit, crop to Selection.
Open Mask 0116 in PSP. Apply mask. Merge group.
Copy and paste close up as a new layer and position so it's somewhat visible.
Activate your mask layer. Go to Selections, select all.
Selections, float.
Go to Selections, invert.
Activate your close up layer and hit delete on your keyboard. Selections, select none.
Change blend mode to Hard light and merge down.
Re-size by 90%.
Add artist copyright and scrap kit maker credit.
Merge visible and save as png.
Add your name.
If animating.
Go to Selections, select all.
Go to Edit and copy merged. Paste as a new animation in Animation Shop.
Hold your Ctrl key down and repeatedly hit letter L on your keyboard for a total of 17frames.
You can watch the count on the lower right hand side of your screen in AS.
Open SimoneAni-OceanApart-001
Go to Edit, select all.
Go to Edit, copy.
Activate your tag.
Go to Edit, select all.
Go to Edit, make sure Propagate Paste is selected.
Go to Edit, Paste, paste into selected frames.
Position on your tag and click into place.
Play and save.
Don't forget to add your name.
You can see my name tutorial HERE.
To save:
Go to File, Save as, enter the name of your file and select the folder to save to.
Now click on Customize:
Under COLORS TAB:
Number of colors: 255 Colors
Create palette by: OPTIMIZED OCTREE
Reduce colors by: Error Diffusion
Under OPTIMIZATIONS TAB:
set a check mark beside the second, third and forth choices. UN-check the 1st and last.
Under PARTIAL TRANSPARENCY:
check Convert pixels less than 92
Yes, blend with this color: change to white #FFFFFF
Click OK. Click Next, next, next, next.
Play your animation.
At times your animation may or will come out terrible. Optimization in Animation Shop is not the greatest.
You can play around will your settings, especially under the Tab: Optimization. I change this setting at times from anywhere between 70 and 100.
Some people add a white background. To add background, go to Animation: Animation Properties, select Opaque and change color to white.
Hope you enjoyed this tutorial,
Hugs Simone
Please, always direct people to my blog to download my animations.
Do not load to any other download site and don't claim as your own.
Tutorial written by SophisticatSimone aka Lorraine Halle on Monday, May 20, 2013.
Please click on TAG to see in full size.
••• Supplies needed to complete this tutorial. •••
________________________________________________________________________
Programs: Paint Shop Pro, I'm using version 10. Animation Shop 3.
Plugin : Eye Candy: Gradient Glow for name
Font used: Carpenter
Tube of choice: I'm using "Punk Mermaid" by Jay Trembly from SATC.
Scrap Kit : I'm using "Mermaid" by Lizquis Scraps from SATC
Animation: I'm using my own, SimoneAni-OceanApartTutorial
________________________________________________________________________
♥♥♥
Save your tag often. Nothing like working long and hard on a tag and PSP crashes.
♥♥♥
Open a new image 725x 796. You can re-size at the end. C/P your tube as a new layer.
C/P decor3 (tire) as a new layer and mirror. Position your mermaid on the tire.
C/P sand1 as a new layer and move done below the tire.
C/P sand2 as a new layer and move behind the tire.
C/P moss2 as a new layer and move in front of the tire to the right.
C/P deco4 as a new layer and move to the left side of tag. Re-size by 48%.
Do the same for deco2 and deco3. Deco3 I mirrored and placed to the left. I placed deco2 to the right.
C/P moss1 as a new layer and move behind all layers and in upper left hand area of tag.
Repeat for deco5. Re-size by 38%. I placed in center of tire.
Repeat for deco6. Re-size by 60%. Mirror and move to the upper right side of tire.
C/P bubbles1 and paste as your top layer. Duplicate and merge. Position anywhere on your tag.
C/P dolphins and mirror.
C/P fish6 and fish2. Re-size and position where you'd like.
Add any other element you like. I added the anchor, the net and the rudder.
Add drop shadow to all layers.
C/P paper and move to bottom. Click on one of the small elements.
Go to Selections, select ALL.
Go to Edit, crop to Selection.
Open Mask 0116 in PSP. Apply mask. Merge group.
Copy and paste close up as a new layer and position so it's somewhat visible.
Activate your mask layer. Go to Selections, select all.
Selections, float.
Go to Selections, invert.
Activate your close up layer and hit delete on your keyboard. Selections, select none.
Change blend mode to Hard light and merge down.
Re-size by 90%.
Add artist copyright and scrap kit maker credit.
Merge visible and save as png.
Add your name.
If animating.
Go to Selections, select all.
Go to Edit and copy merged. Paste as a new animation in Animation Shop.
Hold your Ctrl key down and repeatedly hit letter L on your keyboard for a total of 17frames.
You can watch the count on the lower right hand side of your screen in AS.
Open SimoneAni-OceanApart-001
Go to Edit, select all.
Go to Edit, copy.
Activate your tag.
Go to Edit, select all.
Go to Edit, make sure Propagate Paste is selected.
Go to Edit, Paste, paste into selected frames.
Position on your tag and click into place.
Play and save.
Don't forget to add your name.
You can see my name tutorial HERE.
To save:
Go to File, Save as, enter the name of your file and select the folder to save to.
Now click on Customize:
Under COLORS TAB:
Number of colors: 255 Colors
Create palette by: OPTIMIZED OCTREE
Reduce colors by: Error Diffusion
Under OPTIMIZATIONS TAB:
set a check mark beside the second, third and forth choices. UN-check the 1st and last.
Under PARTIAL TRANSPARENCY:
check Convert pixels less than 92
Yes, blend with this color: change to white #FFFFFF
Click OK. Click Next, next, next, next.
Play your animation.
At times your animation may or will come out terrible. Optimization in Animation Shop is not the greatest.
You can play around will your settings, especially under the Tab: Optimization. I change this setting at times from anywhere between 70 and 100.
Some people add a white background. To add background, go to Animation: Animation Properties, select Opaque and change color to white.
Hope you enjoyed this tutorial,
Hugs Simone
Please, always direct people to my blog to download my animations.
Do not load to any other download site and don't claim as your own.
Tutorial written by SophisticatSimone aka Lorraine Halle on Monday, May 20, 2013.
Saturday, May 11, 2013
♥♥♥
Please click on TAG to see in full size.
••• Supplies needed to complete this tutorial. •••
________________________________________________________________________
Programs: Paint Shop Pro, I'm using version 10. Animation Shop 3.
Plugin : none
Font used: Feathergraphy Decoration
Tube of choice: I'm using "Heartbroken" by Spazz from SATC.
Scrap Kit : I'm using "Heartbroken" by LizquisScraps from SATC
Mask: mine Mask0111
________________________________________________________________________
♥♥♥
Save your tag often. Nothing like working long and hard on a tag and PSP crashes.
♥♥♥
Open Mask0111 and Minimize in PSP.
Open Paper 4, duplicate and close original. Promote background to layer.
Go to Image/Canvas size and enter: 675 x 600.
Apply your mask. Merge group.
Duplicate and merge down.
Copy and paste branch2 as a new layer. Move it to the right side of tag.
Duplicate and re-size by 75%. Free rotate to the left by 90 degrees.
Add drop shadow:
V= -3 H= -3 Opacity=70 Blur=7.25 Color=Black
Copy and paste cross1 as a new layer. Move to the left side of tag. Add same drop shadow.
Copy and paste grass as a new layer. Move to bottom center of tag. Duplicate and re-size by 75% and add drop shadow to each layer. Move to the left side. Duplicate the re-sized layer and mirror so it's on the right side of tag.
Copy and paste hat as a new layer. Mirror and move to the upper right side of tag. Add same drop shadow.
Copy and paste beads as a new layer. Re-size by 75% and move to the right side of tag. Add same drop shadow.
Copy and paste a close up tube or tube of choice. Add drop shadow. Grab your selection tool, set to rectangle, feather 0.
Select the section of tube that is below the grass line. Hit delete on your keyboard.
Now anywhere that your tube's head is hidden under the leaves at the top, select that and promote selection to layer. Move that layer to the top. On original tube layer, hit delete.
Select your crop tool and enter 675 x 600. Double click on your tag.
Copy and paste bird and re-size by 45%. Move to lower right hand side and add drop shadow.
Copy and paste decor2 as a new layer. Duplicate and re-size by 80%. Move both the left and leave a gap between them. Add drop shadow to each.
Copy and paste cross2 as a new layer. Re-size by 45% and move it to bottom of tag and in between the grass layers. Add drop shadow.
Merge all visible and add artist copyright. Scrap kit credit and add your name.
Merge visible and save as PNG.
Hope you enjoyed this tutorial,
Hugs Simone
Please, always direct people to my blog to download my animations.
Do not load to any other download site and don't claim as your own.
Tutorial written by SophisticatSimone aka Lorraine Halle on Saturday, May 11, 2013.
Please click on TAG to see in full size.
••• Supplies needed to complete this tutorial. •••
________________________________________________________________________
Programs: Paint Shop Pro, I'm using version 10. Animation Shop 3.
Plugin : none
Font used: Feathergraphy Decoration
Tube of choice: I'm using "Heartbroken" by Spazz from SATC.
Scrap Kit : I'm using "Heartbroken" by LizquisScraps from SATC
Mask: mine Mask0111
________________________________________________________________________
♥♥♥
Save your tag often. Nothing like working long and hard on a tag and PSP crashes.
♥♥♥
Open Mask0111 and Minimize in PSP.
Open Paper 4, duplicate and close original. Promote background to layer.
Go to Image/Canvas size and enter: 675 x 600.
Apply your mask. Merge group.
Duplicate and merge down.
Copy and paste branch2 as a new layer. Move it to the right side of tag.
Duplicate and re-size by 75%. Free rotate to the left by 90 degrees.
Add drop shadow:
V= -3 H= -3 Opacity=70 Blur=7.25 Color=Black
Copy and paste cross1 as a new layer. Move to the left side of tag. Add same drop shadow.
Copy and paste grass as a new layer. Move to bottom center of tag. Duplicate and re-size by 75% and add drop shadow to each layer. Move to the left side. Duplicate the re-sized layer and mirror so it's on the right side of tag.
Copy and paste hat as a new layer. Mirror and move to the upper right side of tag. Add same drop shadow.
Copy and paste beads as a new layer. Re-size by 75% and move to the right side of tag. Add same drop shadow.
Copy and paste a close up tube or tube of choice. Add drop shadow. Grab your selection tool, set to rectangle, feather 0.
Select the section of tube that is below the grass line. Hit delete on your keyboard.
Now anywhere that your tube's head is hidden under the leaves at the top, select that and promote selection to layer. Move that layer to the top. On original tube layer, hit delete.
Select your crop tool and enter 675 x 600. Double click on your tag.
Copy and paste bird and re-size by 45%. Move to lower right hand side and add drop shadow.
Copy and paste decor2 as a new layer. Duplicate and re-size by 80%. Move both the left and leave a gap between them. Add drop shadow to each.
Copy and paste cross2 as a new layer. Re-size by 45% and move it to bottom of tag and in between the grass layers. Add drop shadow.
Merge all visible and add artist copyright. Scrap kit credit and add your name.
Merge visible and save as PNG.
Hope you enjoyed this tutorial,
Hugs Simone
Please, always direct people to my blog to download my animations.
Do not load to any other download site and don't claim as your own.
Tutorial written by SophisticatSimone aka Lorraine Halle on Saturday, May 11, 2013.
Subscribe to:
Posts
(Atom)
CT TEAM
